5.0MX5

I've Finally got back on the 302 Miata project. It's been down for a couple years (actually up, as on the lift effectively taking both out of service). Currently I'm changing transmissions and could use some guidance. Upgrading to a T5 from a 2000 3.8, replacing a T5 from a '86, 4 cylinder. I've already shortened the input shaft on the newer T5 by .67". Now I'm working on swapping parts from the mechanical speedometer (drive gear) to the electronic trans. No problem there.

Problem; the 87 tailshaft lacks about 1/8" latching up to the 2000 case. It appears the reverse brake and linkage is the culprit.

Question; can I swap the linkage and brake between the two transmissions? If so, are there gotachas that could bite me during the swap?

Thanks in advance.

RonR

tbone heller

Give these guys a call:Southern Gear Co. - The Standard Transmission Professionals This is where I get all of my standard transmission stuff. I am sure that they can point you in the right direction and supply you with any needed parts.