Hey all, it’s been a while. I purchased some sway bar end links from v8r but I can’t figure out if I’m missing something.. I can’t figure out how they are supposed to install. I’ve installed supermiata ones before and the conical pieces that meet up with the bearings were about half the size and fit between the mount on the control arm. The ones supplied in the v8r kit are much thicker and don’t fit like that. I’m only able to fit one in. See picture. I found that some 5x racing sell use a spacer within the bracket on the arm and mount the link itself in front of the bracket. But the spacers provided aren’t thick enough for that either. basically I’m confused and wanted to post here to ask if anyone had come across this before.