My Post Pictures

January 30, 2019

127

0

A buddy hooked me up with his accusump so I could prime my motor.

A buddy hooked me up with his accusump so I could prime my motor.

0 2021/10/11 00:09:23 Dan_W

This is the left side / Front corner of the block where i hooked up the accusump. This is immediately after the oil pump. This was a great opportunity to verify my oil pressure sensor was functional before starting the car.

This is the left side / Front corner of the block where i hooked up the accusump. This is immediately after the oil pump. This was a great opportunity to verify my oil pressure sensor was functional before starting the car.

0 2021/10/11 00:10:28 Dan_W

This is the metric to NPT adapter fitting I used.

This is the metric to NPT adapter fitting I used.

0 2021/10/11 00:11:38 Dan_W

Nearing the end now. Finally added fluids to it and the gas is really stinking up the garage so i let the old charcoal canister hang. A functional Evap system is on the to-do list.

Nearing the end now. Finally added fluids to it and the gas is really stinking up the garage so i let the old charcoal canister hang. A functional Evap system is on the to-do list.

0 2021/10/11 00:14:37 Dan_W

My 9" JRW'S came in after a long wait. Looking good.

My 9" JRW'S came in after a long wait. Looking good.

0 2021/10/11 00:21:07 Dan_W

0 2021/10/11 00:22:22 Dan_W

Relocated the brake lines off the firewall and under the motor and to the left side of the car. Also decided to run my fuel line up the drivers side instead of the passenger side. Things were just too tight by the exhaust.

Relocated the brake lines off the firewall and under the motor and to the left side of the car. Also decided to run my fuel line up the drivers side instead of the passenger side. Things were just too tight by the exhaust.

0 2021/10/11 00:23:54 Dan_W

Page
4 of 4

Go To
Page

Go to page of 4 pages

1
2
3
4