Wanted 302 Ford powered Miata
#2
V8 Miata Noob
Join Date: Nov 2010
Location: scituate ma
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
v8 302 MA
Hey, down south of Boston, in Scituate, have 91 NA texas car, no rust, monster kit, new crate 302 FI with Trickflo heads, new WC 5 spd, fresh 3.27 tbird rear. runs fine, HD rollbar, just don;t use as much, Chasis has 107k, drive train about 15k, Wife hates the car, and I have given up autoX. ,tokico shocks, RB hollow Front Roll bar what are you thinking of spending? I am looking for something in the 12k range white with black interior let me know if you have any interest
#3
#6
I am also looking for a Ford powered miata, and 302 is fine.
I got a ride in an LS6 powered NB last week and it was too much. a v8 with 275-320 hp is plenty to scare me. 450 almost made me throw up. I still want that car, but I know I'd be happier with a small ford.
I got a ride in an LS6 powered NB last week and it was too much. a v8 with 275-320 hp is plenty to scare me. 450 almost made me throw up. I still want that car, but I know I'd be happier with a small ford.
#8
347 Stroker In 1995
Have a very sweet 400HP Monster Miata, 1995 with a fresh 347 stroker SBF, new T5, 7.5" Diff with LSD, stainless custom exhaust. Car run, drives and handles like a dream. Ringwood, NJ. Asking $19k OBO. Call Bob, 908-586-6615.
Last edited by Slothbob; 02-20-2020 at 07:40 PM. Reason: Update location
#9
V8 Miata Noob
Join Date: Aug 2019
Location: Chatham, IL
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Selling my Mazda Miata with a 302 V8 swap. It's a poor man’s AC Cobra!
Year: 1992
Make: Mazda
Model: Miata MX5
Engine: Ford 5.0/302 (from an 89 Mustang), .30 over 1993 Cobra crank and rods, with forged pistons, new bearings and seals, camshaft, crankshaft. I was told the horsepower was ~370 from the guy that built the motor, but I have not substantiated this
Heads: 195 Edelbrock Performer RPM aluminum heads with 1.95 and 2.02 valves with upgraded springs and rockers.
Camshaft: Comp Cams Xtreme Energy 493/500 lift
Fuel: FiTech Go EFI 4 fuel injection system on aluminum intake with Ford Racing tall rocker covers. Ready for boost/nitrous; has all the controls and tuning capabilities right at your fingertips with the digital display
Trans: Ford World Class T-5, freshly rebuilt with new bearings and new Ford Racing flywheel, Stage 2 clutch, hydraulic clutch slave, custom drive shaft
Diff: Ford 8.8 rear differential with 355 gears and custom chromoly axles with upgraded wheel hubs
Exhaust: Headers with side pipes
Paint: It is factory red, it looks like it was repainted once, but could use it again
Wheels: 15x7 aftermarket (unknown brand)
Tires: Accelera 205/50 ZR15 89WXL rear
Other: It has a Hard Dog rollbar, new trunk-mounted battery, MSD ignition, custom V8 Miata seats, aftermarket hood scoop
Price: $12,000
This car runs and drives and it's a sleeper…and most importantly – it is FAST. I have had 4 Fox-body Mustangs, and none of them would hang with this little Monster.
The individual I bought it from had set it up to use as a drift car. He bought it from the guy who built it. I can provide you with the builder’s number for more info.
It could easily be tuned for street, drag, or drift.
I have more pics and videos of it running and driving. Just send me a message and I would be happy to send them to you. I am located near Springfield, IL.
Year: 1992
Make: Mazda
Model: Miata MX5
Engine: Ford 5.0/302 (from an 89 Mustang), .30 over 1993 Cobra crank and rods, with forged pistons, new bearings and seals, camshaft, crankshaft. I was told the horsepower was ~370 from the guy that built the motor, but I have not substantiated this
Heads: 195 Edelbrock Performer RPM aluminum heads with 1.95 and 2.02 valves with upgraded springs and rockers.
Camshaft: Comp Cams Xtreme Energy 493/500 lift
Fuel: FiTech Go EFI 4 fuel injection system on aluminum intake with Ford Racing tall rocker covers. Ready for boost/nitrous; has all the controls and tuning capabilities right at your fingertips with the digital display
Trans: Ford World Class T-5, freshly rebuilt with new bearings and new Ford Racing flywheel, Stage 2 clutch, hydraulic clutch slave, custom drive shaft
Diff: Ford 8.8 rear differential with 355 gears and custom chromoly axles with upgraded wheel hubs
Exhaust: Headers with side pipes
Paint: It is factory red, it looks like it was repainted once, but could use it again
Wheels: 15x7 aftermarket (unknown brand)
Tires: Accelera 205/50 ZR15 89WXL rear
Other: It has a Hard Dog rollbar, new trunk-mounted battery, MSD ignition, custom V8 Miata seats, aftermarket hood scoop
Price: $12,000
This car runs and drives and it's a sleeper…and most importantly – it is FAST. I have had 4 Fox-body Mustangs, and none of them would hang with this little Monster.
The individual I bought it from had set it up to use as a drift car. He bought it from the guy who built it. I can provide you with the builder’s number for more info.
It could easily be tuned for street, drag, or drift.
I have more pics and videos of it running and driving. Just send me a message and I would be happy to send them to you. I am located near Springfield, IL.
Thread
Thread Starter
Forum
Replies
Last Post
Gunpilot
Ford V8 Miata Build Threads
89
10-06-2022 08:18 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)