V8 Miata Wiring, Electrical, and ECUs v8 conversions on a Miata can be tricky. Post your comments or questions within with regards to swap wiring and electrical.

Dbw questions.

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 07-15-2012, 11:37 PM
  #1  
V8 Miata Noob
Thread Starter
 
yada's Avatar
 
Join Date: Apr 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Dbw questions.

I have been searching like crazy for the past couple weeks and have only found one source that somewhat helps. I will be starting an ls1 swap soon. I know that I will need the throttle pedal but will I need the tac module as well? By the way the ls1,ecu, and engine harness came from an 01 vette. I don't know if that changes anything. Thanks for the help and I'm sorry if it's a dumb question.
Old 07-16-2012, 10:53 PM
  #2  
V8 Miata Noob
Thread Starter
 
yada's Avatar
 
Join Date: Apr 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Must be a dumb question. I think that I have found the info I needed but I just want to make sure.
Old 07-17-2012, 09:55 AM
  #3  
V8 Miata Noob
 
carnut169's Avatar
 
Join Date: Jun 2012
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

so what was the answer?
Old 07-17-2012, 10:09 AM
  #4  
V8 Miata Noob
Thread Starter
 
yada's Avatar
 
Join Date: Apr 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

I believe you must have the tac module along with the accelerator pedal. It just threw me for a loop because I had read over at ls1tech that the vettes didn't have tac modules and I also couldn't find any info from anybody's swap thread about the tac module. But the vettes do have tac modules and either I misunderstood the post or was an inaccurate post. Moral of the story I believe is you need both the accelerator pedal and tac module.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 09:33 AM.