Two completed OEM looking nylon lines. The part numbers I used are: Dorman 800-084: 5/16 QC to 3/8 barb 800-093 same as above but 90 deg 800-086 3/8 QC to 3/8 Barb 800-072 25 feet of 3/8 nylon line I think I bought enough stuff to make the entire fuel system (Not yet done) for about $75. Not bad I found that if i heated up one side of the nylon with the heat gun carefully, gently sandwiched it in-between vice jaws, I could bend it without kinking.