Ford V8 Discussion Discussion relating to getting the most out of your Ford-based V8 Miata's engine

5.0 Engine is sideways in Martin's subframe?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 09-19-2020, 03:35 PM
  #1  
V8 Miata Fan
Thread Starter
 
Mirage775's Avatar
 
Join Date: Dec 2017
Location: Huntsville, Alabama
Posts: 51
Received 1 Like on 1 Post
Default 5.0 Engine is sideways in Martin's subframe?

Just went and looked at a 5.0 build not too far away from me today. Unsure if he's on this forum or not, but he hasn't touched his NB2 in 8 years. He said the last thing he did was put the engine/trans in, in 2012 and never did anything else... We were talking about the engine being crooked/sideways though. He said Martin has slots on the mounts to set the engine straight and he does not have anymore room in the engine and move either the left or the right side, so that the engine is sitting straight and true in the bay? Looking at the pic, the right (drivers side) is all the way forward to where the radiator would be and the left (pass side) is pushed all the way to the firewall . He said he cannot adjust it at all... What could it be? Has anyone else had this problem before?

Something I wanted to research before I jumped into this build?

Thanks


Last edited by Mirage775; 09-19-2020 at 04:30 PM.
Old 09-19-2020, 03:42 PM
  #2  
V8 Miata Participant
 
mrmustang's Avatar
 
Join Date: Mar 2012
Location: Greenville, SC
Posts: 338
Likes: 0
Received 18 Likes on 18 Posts
Default

Bet he has the engine mounts on the wrong side

Ask if he has given up and wants to sell, I'm just about to start a search for my next project and this could be it


Bill S.
Old 09-19-2020, 04:09 PM
  #3  
V8 Miata Fan
Thread Starter
 
Mirage775's Avatar
 
Join Date: Dec 2017
Location: Huntsville, Alabama
Posts: 51
Received 1 Like on 1 Post
Default

Originally Posted by mrmustang
Bet he has the engine mounts on the wrong side

Ask if he has given up and wants to sell, I'm just about to start a search for my next project and this could be it


Bill S.
We asked about the engine mounts and he said they were the same for both sides and Martin didn't mention they were different? To that I said, I'd check them again, cause I've never heard anyone have this complaint before?

I was hoping he wanted to sell it, but he said nope, he was going to finish it... He has 2 BMW's Z3 M, a newer Z4 Hardtop convertible, some kind of Chevy van, a Subaru SUV, a Honda Odyssey, an old MG, 2 motorcycles, a 15 passenger van and some kind of Mazda van/SUV. I don't think he'll ever get the Miata finished, LOL! He said his wife recently divorced him and I see why, haha!
Old 09-19-2020, 07:51 PM
  #4  
V8 Miata Fanatic
 
MX-Brad's Avatar
 
Join Date: Mar 2014
Location: SW Ont.
Posts: 635
Received 37 Likes on 32 Posts
Default

The mounts 100% are not symetrical. The slots are offset to one end. Sounds like they need to be flipped around.
Old 09-19-2020, 09:29 PM
  #5  
V8 Miata Fan
Thread Starter
 
Mirage775's Avatar
 
Join Date: Dec 2017
Location: Huntsville, Alabama
Posts: 51
Received 1 Like on 1 Post
Default

Originally Posted by MX-Brad
The mounts 100% are not symetrical. The slots are offset to one end. Sounds like they need to be flipped around.
Yea, that's what myself and stepfather were telling him, but he assured us they were the same... This is the last thing he did to the car, 8 years ago.... That picture I posted is 8 years old and looks almost the same as it did today, LOL! I told him, well, I still would like to have one, so it'll be a mini AC Cobra. He looked like a deer in headlights when I said that and I said, please tell me you know what an AC Cobra is? He said he did not know... So, today for about 2-2.5 hours, we talked about everything but the monster swap, since he didn't seem to know much about his own car?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Gunpilot
DIY How-to Instructions
0
06-02-2019 12:17 AM
5.0MX5
DIY How-to Instructions
4
07-06-2017 08:38 AM
MiataDoug
Ford V8 Discussion
15
10-12-2015 12:57 PM
sebz
Ford V8 Discussion
8
10-19-2011 07:03 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: 5.0 Engine is sideways in Martin's subframe?



All times are GMT -5. The time now is 12:07 PM.