Driveshaft angle explained
Thread Starter
Jim Stainer
Joined: Jul 2011
Posts: 2,462
Likes: 62
From: Sunny SW Minnesota
Driveshaft angle explained
I've never seen it explained more clearly than this.
It t takes a $35 tool and a half hour to measure your pinion angle.
http://www.sears.com/craftsman-digit...3&blockType=G3
It t takes a $35 tool and a half hour to measure your pinion angle.
http://www.sears.com/craftsman-digit...3&blockType=G3
Last edited by charchri4; Mar 11, 2014 at 05:08 AM.
V8 Miata Follower
Joined: Jul 2015
Posts: 105
Likes: 8
From: Atlanta
I need to do this. I have a little vibration above 80mph...
I noticed it after I replaced a broken trans mount with a new one. The old one was broken so badly that pieces of the rubber were missing so I'm not positive what the height was before I put the new mount in. After the new mount, I noticed the vibration. I'm assuming the trans needs to be lowered slightly at the tailshaft but really need to measure the angles to be sure instead of guessing....
I noticed it after I replaced a broken trans mount with a new one. The old one was broken so badly that pieces of the rubber were missing so I'm not positive what the height was before I put the new mount in. After the new mount, I noticed the vibration. I'm assuming the trans needs to be lowered slightly at the tailshaft but really need to measure the angles to be sure instead of guessing....
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
