Tube chassis turbo ls miata build. Delaware.
#1
V8 Miata Fan
Thread Starter
Tube chassis turbo ls miata build. Delaware.
Basic run down....
92 miata
6.0 lq4 chevy
75mm borg t6 turbo
Six speed
Solid axle ford 9 inch
06 miata front sub frame and suspension
Three link with a frame mounted watts link rear suspension
Pics to come soon.
92 miata
6.0 lq4 chevy
75mm borg t6 turbo
Six speed
Solid axle ford 9 inch
06 miata front sub frame and suspension
Three link with a frame mounted watts link rear suspension
Pics to come soon.
#2
V8 Miata Fan
Thread Starter
#3
V8 Miata Fan
Thread Starter
#4
V8 Miata Fan
Thread Starter
Im front mounting the turbo. The rad will be in the trunk. 2x3 frame will stop at crossmember mounts, the be a removable tube clip. Ill be running a remote mount electric water pump. http://i1278.photobucket.com/albums/...psaf51a7cc.jpg
#5
V8 Miata Fan
Thread Starter
#9
V8 Miata Fan
Thread Starter
It would be faster with the turbo but I like to drive my car. Not stab and steer. 335/35/17 is whats going in the rear. Plenty of tire choices in that size. I just try to keep all the factors that make great cars in each kind of racing and try to pick the best compromises between them all. Weight, power, traction, chassis stiffness and suspension. I hope I succeed!
#10
V8 Miata Fan
Thread Starter
Im using hooker swap manifolds and flipping them up and forward. Most people use truck manifolds. The hooker manifolds have larger primaries and are tighter to the engine.
http://i1278.photobucket.com/albums/...pscab9de8c.jpg
Normally look like this. http://i1278.photobucket.com/albums/...ps2f954a00.jpg
http://i1278.photobucket.com/albums/...pseed7ed17.jpg
http://i1278.photobucket.com/albums/...pscab9de8c.jpg
Normally look like this. http://i1278.photobucket.com/albums/...ps2f954a00.jpg
http://i1278.photobucket.com/albums/...pseed7ed17.jpg
Last edited by miatainthe10s; 12-29-2012 at 05:42 PM.
#11
V8 Miata Fan
Thread Starter
#12
V8 Miata Fan
Thread Starter
Sold the big t6 turbo and bought two smaller s366 t4 turbos. Borg warner Pn 177275
Starting to mock up where the engine and 06 miata front sub frame will sit.
http://i1278.photobucket.com/albums/...psd1066b0a.jpg
http://i1278.photobucket.com/albums/...ps2ddfe555.jpg
Starting to mock up where the engine and 06 miata front sub frame will sit.
http://i1278.photobucket.com/albums/...psd1066b0a.jpg
http://i1278.photobucket.com/albums/...ps2ddfe555.jpg
#15
V8 Miata Fan
Thread Starter
#16
V8 Miata Fan
Thread Starter
#17
V8 Miata Fan
Thread Starter
Gonna do some more tomorrow. Finish mounting front sub frame. Triangulate the front rail to the upright. I set the turbos on the rails just for the pure excitement of it. This thing is gonna be wicked! http://i1278.photobucket.com/albums/...ps18fe7c0d.jpg