Another pic dump
Test fit of V8 Roadsters universal sub-frame
http://www3.telus.net/mediasorce/90Miata/Miata (15).jpg http://www3.telus.net/mediasorce/90Miata/Miata (21).jpg http://www3.telus.net/mediasorce/90Miata/Miata (22).jpg Dash out and carpet http://www3.telus.net/mediasorce/90Miata/Miata (17).jpg http://www3.telus.net/mediasorce/90Miata/Miata (18).jpg http://www3.telus.net/mediasorce/90Miata/Miata (19).jpg Minor Rear Quarter Rusting http://www3.telus.net/mediasorce/90Miata/Miata (20).jpg T5 from 83 Mustang for Project http://www3.telus.net/mediasorce/90Miata/Miata (23).jpg 68 302 Block http://www3.telus.net/mediasorce/90Miata/Miata (24).jpg Too Bad this Bad Boy won't fit so easy, I have a pair http://www3.telus.net/mediasorce/90Miata/Miata (25).jpg Old School for this Build, The theme is to use up some of my parts... Next build will be fuelie.... http://www3.telus.net/mediasorce/90Miata/Miata (26).jpg http://www3.telus.net/mediasorce/90Miata/Miata (27).jpg http://www3.telus.net/mediasorce/90Miata/Miata (28).jpg Stripping out the wiring harness of unnecessary wires http://www3.telus.net/mediasorce/90Miata/Miata (29).jpg http://www3.telus.net/mediasorce/90Miata/Miata (30).jpg http://www3.telus.net/mediasorce/90Miata/Miata (31).jpg http://www3.telus.net/mediasorce/90Miata/Miata (32).jpg Drop out the Rear Sub-frame http://www3.telus.net/mediasorce/90Miata/Miata (33).jpg http://www3.telus.net/mediasorce/90Miata/Miata (35).jpg http://www3.telus.net/mediasorce/90Miata/Miata (36).jpg |
Lets Dump some more
Look at that, found some cobra 1.7 roller rockers laying in a corner of the shop
http://www3.telus.net/mediasorce/90Miata/Miata (37).jpg Timing cover from 79, water pump normal rotation for 83 Capri, manual steering, use these on my Drag car when I eliminated the power steering and wanted to shorten the serpentine system. I kept throwing V-Belts on old system when I would hit the 300HP laughing juice. can confirm that above water pump with smooth pulley with under-drive alt pulley and standard tensioner works flawlessly at 8500RPM on the squeeze. Will post drag car set-up once local track opens. http://www3.telus.net/mediasorce/90Miata/Miata (38).jpg http://www3.telus.net/mediasorce/90Miata/Miata (39).jpg Headers Arrived, going to try and make this kit work http://www3.telus.net/mediasorce/90Miata/Miata (40).jpg Friend just sent me pics of his home built 3 axis CAD/CAM for carving model plane wings and such, testing movement before stepper motors are added http://www3.telus.net/mediasorce/90Miata/Miata (41).jpg Its Plasma Time, now its getting fun http://www3.telus.net/mediasorce/90Miata/Miata (42).jpg http://www3.telus.net/mediasorce/90Miata/Miata (43).jpg http://www3.telus.net/mediasorce/90Miata/Miata (44).jpg http://www3.telus.net/mediasorce/90Miata/Miata (45).jpg http://www3.telus.net/mediasorce/90Miata/Miata (46).jpg http://www3.telus.net/mediasorce/90Miata/Miata (47).jpg http://www3.telus.net/mediasorce/90Miata/Miata (48).jpg Patch Time http://www3.telus.net/mediasorce/90Miata/Miata (49).jpg http://www3.telus.net/mediasorce/90Miata/Miata (50).jpg http://www3.telus.net/mediasorce/90Miata/Miata (51).jpg |
Going to keep the pics coming
Mocking up the Cowl Braces
http://www3.telus.net/mediasorce/90Miata/Miata (52).JPG http://www3.telus.net/mediasorce/90Miata/Miata (53).JPG http://www3.telus.net/mediasorce/90Miata/Miata (54).JPG http://www3.telus.net/mediasorce/90Miata/Miata (55).JPG http://www3.telus.net/mediasorce/90Miata/Miata (56).JPG http://www3.telus.net/mediasorce/90Miata/Miata (57).JPG http://www3.telus.net/mediasorce/90Miata/Miata (58).JPG Out of interest, the top mounts are in different locations from left to right http://www3.telus.net/mediasorce/90Miata/Miata (59).JPG http://www3.telus.net/mediasorce/90Miata/Miata (60).JPG http://www3.telus.net/mediasorce/90Miata/Miata (61).JPG http://www3.telus.net/mediasorce/90Miata/Miata (62).JPG http://www3.telus.net/mediasorce/90Miata/Miata (63).JPG http://www3.telus.net/mediasorce/90Miata/Miata (64).JPG http://www3.telus.net/mediasorce/90Miata/Miata (65).JPG http://www3.telus.net/mediasorce/90Miata/Miata (66).JPG http://www3.telus.net/mediasorce/90Miata/Miata (67).JPG http://www3.telus.net/mediasorce/90Miata/Miata (68).JPG http://www3.telus.net/mediasorce/90Miata/Miata (69).JPG Time to burn some Wire http://www3.telus.net/mediasorce/90Miata/Miata (70).JPG http://www3.telus.net/mediasorce/90Miata/Miata (71).JPG http://www3.telus.net/mediasorce/90Miata/Miata (72).JPG http://www3.telus.net/mediasorce/90Miata/Miata (73).JPG http://www3.telus.net/mediasorce/90Miata/Miata (74).JPG http://www3.telus.net/mediasorce/90Miata/Miata (75).JPG |
More More More
Welds Lightly Dressed
http://www3.telus.net/mediasorce/90Miata/Miata (76).JPG http://www3.telus.net/mediasorce/90Miata/Miata (77).JPG http://www3.telus.net/mediasorce/90Miata/Miata (78).JPG Bit of body Welding http://www3.telus.net/mediasorce/90Miata/Miata (79).JPG http://www3.telus.net/mediasorce/90Miata/Miata (80).JPG http://www3.telus.net/mediasorce/90Miata/Miata (81).JPG Being out side I need a bit of primer http://www3.telus.net/mediasorce/90Miata/Miata (82).JPG http://www3.telus.net/mediasorce/90Miata/Miata (83).JPG http://www3.telus.net/mediasorce/90Miata/Miata (84).JPG Finish up on Cowl Braces http://www3.telus.net/mediasorce/90Miata/Miata (85).JPG http://www3.telus.net/mediasorce/90Miata/Miata (86).JPG http://www3.telus.net/mediasorce/90Miata/Miata (87).JPG http://www3.telus.net/mediasorce/90Miata/Miata (88).JPG Final Fitting http://www3.telus.net/mediasorce/90Miata/Miata (89).JPG http://www3.telus.net/mediasorce/90Miata/Miata (90).JPG Lower Web Fitment http://www3.telus.net/mediasorce/90Miata/Miata (91).JPG http://www3.telus.net/mediasorce/90Miata/Miata (92).JPG http://www3.telus.net/mediasorce/90Miata/Miata (93).JPG Minor Clearancing http://www3.telus.net/mediasorce/90Miata/Miata (94).JPG Cowl Braces Ready for Paint http://www3.telus.net/mediasorce/90Miata/Miata (95).JPG http://www3.telus.net/mediasorce/90Miata/Miata (96).JPG |
Looking great so far!
|
Very nice welding! I may have to make my own cowl braces like this in the near future.
Also, nice E46. I have an E36 M. Glad to see another Bimmer enthusiasts building monster miatas. I work at a Bimmer indy shop and all of my coworkers think my Miata is a joke. I will show them in a few months when it is done though |
He who laughs last, laughs the loudest
rowen210
Won't be any laughter but yours when done, lol. Funny, all my Mustang, Camaro buddies think it's a joke too. Funny my M already toasts most vintage big blocks and my MX5 is only going to be faster. We will both be laughing when done. Dean0 |
Few more pics to add to the pile
Didn't get much done this weekend but had to test fit engine. Going to try and use the Headman 89500 Ranger swap headers, to send me a split up kit from Summit with the 88400LSO and 89500RSO was going to be $149 + $189. Too much for this guy so I paid $209 and will make the 89500 kit work. Going to make my own for next build: PIC TIME!
http://www3.telus.net/mediasorce/90Miata/Miata (98).JPG http://www3.telus.net/mediasorce/90Miata/Miata (99).JPG http://www3.telus.net/mediasorce/90M...iata (100).JPG http://www3.telus.net/mediasorce/90M...iata (101).JPG http://www3.telus.net/mediasorce/90M...iata (102).JPG Now the fun part... LOOKS LIKE A GO!!! http://www3.telus.net/mediasorce/90M...iata (104).JPG http://www3.telus.net/mediasorce/90M...iata (105).JPG http://www3.telus.net/mediasorce/90M...iata (106).JPG http://www3.telus.net/mediasorce/90Miata/Miata (97).JPG Small amount of tubing work... will fix up better when I finish the sub-frame connectors. http://www3.telus.net/mediasorce/90M...iata (103).JPG |
Got a little further along
Notched the oil pan getting ready to TIG in a new 16Ga filler
http://www3.telus.net/mediasorce/90M...iata (107).JPG http://www3.telus.net/mediasorce/90M...iata (108).JPG http://www3.telus.net/mediasorce/90M...iata (112).JPG Anybody guess what my background project is? hint - it came with a factory roots blower and killed 5.0 mustangs all day! Painted the cowl braces up... looks good for something nobody sees http://www3.telus.net/mediasorce/90M...iata (110).JPG Grabbed two 48" lengths of 14Ga 2" X 2" Steel tubing for my sub-frame connectors. Wanted the extra beef for my T5 Cross Mount. http://www3.telus.net/mediasorce/90M...iata (109).JPG Cleaned up the rack and reshaped the existing tubing to clear the V8 Roaster Sub-frame. http://www3.telus.net/mediasorce/90M...iata (111).JPG Keep Moving Forward |
Slow weekend but some Progress
Oil pump to bottom of stock pan
http://www3.telus.net/mediasorce/90M...iata (114).JPG Filler piece cut http://www3.telus.net/mediasorce/90M...iata (115).JPG My favorite portable press, hubs ready to broach http://www3.telus.net/mediasorce/90M...iata (116).JPG TIG'd in place, little shaky http://www3.telus.net/mediasorce/90M...iata (117).JPG http://www3.telus.net/mediasorce/90M...iata (118).JPG http://www3.telus.net/mediasorce/90M...iata (119).JPG http://www3.telus.net/mediasorce/90M...iata (120).JPG Piece that was cut our http://www3.telus.net/mediasorce/90M...iata (121).JPG Leak test with solvent, 2 hrs still dry, willing to risk it http://www3.telus.net/mediasorce/90M...iata (122).JPG http://www3.telus.net/mediasorce/90M...iata (123).JPG All painted up http://www3.telus.net/mediasorce/90M...iata (124).JPG |
More Weekend Progress - Subframe Connectors
Decided to remove fuel tank, want to run new lines and change FP anyways
http://www3.telus.net/mediasorce/90M...iata (126).JPG http://www3.telus.net/mediasorce/90M...iata (127).JPG Floor and bent frame rails cut out, ready for 14 Ga 2 X 2 tubing http://www3.telus.net/mediasorce/90M...iata (128).JPG Cut in floor section http://www3.telus.net/mediasorce/90M...iata (129).JPG http://www3.telus.net/mediasorce/90M...iata (130).JPG I hope to never see undercoating again, what a pain in the A$$ http://www3.telus.net/mediasorce/90M...iata (131).JPG http://www3.telus.net/mediasorce/90M...iata (132).JPG http://www3.telus.net/mediasorce/90M...iata (133).JPG Test fit of new frame rails, bit more clean up and some weld through primer yet. http://www3.telus.net/mediasorce/90M...iata (134).JPG Notched into existing sub-frame for strength http://www3.telus.net/mediasorce/90M...iata (136).JPG http://www3.telus.net/mediasorce/90M...iata (137).JPG Bit Blurry but existing frame rails to be bent in 1/8" each side to tie into new frame rails. http://www3.telus.net/mediasorce/90M...iata (138).JPG |
Small amount of progress
Dug out my donor rear from a 92 Tbird, been out back for 15 plus years.
http://www3.telus.net/mediasorce/90M...iata (139).JPG 7.5 - 3L27 have a set of 3.55 gears for IRS rear, may change http://www3.telus.net/mediasorce/90M...iata (140).JPG Pumpkin and axles removed ready for cleaning http://www3.telus.net/mediasorce/90M...iata (141).JPG Save the hubs for a future project http://www3.telus.net/mediasorce/90M...iata (142).JPG |
Thanks for all the great pics of the cowl braces, those will be great for when I build myself a set.
|
Gotta love the design philosophy that created an IRS with cast iron!! a-arms and aluminum uprights. The uprights are great, the arms not so much.
Mike |
Tbird rear A-arms
stng_96
Just trying to help out, I know how some folk like lots of pictures.. I can do that!! cvx_20 Could not agree more, lol. Maybe they needed the weight to smooth out the ride. At least the IRS out of the Mustang Cobras is a bit better looking. A bit more Aluminum, LOL. http://www3.telus.net/mediasorce/Rear/rear (3).JPG Waiting for next project, 1st is just a warm up. Thinking 427Clevelor with stock 351C 4BBL heads... see how the LS boys like that.. :skid: Dean0 |
Small Parts Update
New '04 Sport rear brake rotors, Much larger Vs Stock
http://www3.telus.net/mediasorce/90M...iata (143).JPG 10 7/8" VS stock 9 1/8" http://www3.telus.net/mediasorce/90M...iata (144).JPG http://www3.telus.net/mediasorce/90M...iata (145).JPG 04 Sport Calipers and mounts.. going to paint any color but RED!! http://www3.telus.net/mediasorce/90M...iata (146).JPG New rear Brake flex lines / Miata Slave / 70 CJ7 Master 13 / 16" bore http://www3.telus.net/mediasorce/90M...iata (147).JPG Still waiting to connect with a fellow member in Calgary for flares and front Sport Brakes / Rotors. Very busy time of year for me but I will be getting back to the project soon. Keep Moving Forward Dean0 |
New Frame Rails
Finally had the chance to bend up some frame connectors, After I cut the old rails out and manufactured some new 14 ga 2"x2" tubing I was not happy with how it looked and anybody that has closed up frame rails and winter weather $h1t will just go bad with sealed frame connectors. This will make everything look much more professional and weather resistant. Installed pics soon.
http://www3.telus.net/mediasorce/90M...iata (148).JPG Those interested in the Dimensions they are 14Ga, 2" high by 2.375" wide, 37" long http://www3.telus.net/mediasorce/90M...iata (149).JPG |
Mocking Up Pumpkin/ adding Subframe brackets
My Job seems to be getting in the way of my Hobby L8tly but then NO JOB - NO HOBBY. At least when it comes to V8 Miata's. Was able to start the mock up of the Rear End this weekend, hope to have time after work this week to bend up some steel for brackets. Now the Pics and the hours of media blasting, fun fun.
http://www3.telus.net/mediasorce/90M...iata (150).JPG SHOP PORN ▲▲ http://www3.telus.net/mediasorce/90M...iata (151).JPG http://www3.telus.net/mediasorce/90M...iata (152).JPG http://www3.telus.net/mediasorce/90M...iata (153).JPG Going to use the 1999 Mustang Cobra IRS rear isolator, will replace later if I find it an issue. http://www3.telus.net/mediasorce/90M...iata (154).JPG Was thinking of flipping sides but the more I looked at it the more it made sense to be on the the drivers side to help off set the applied torque. http://www3.telus.net/mediasorce/90M...iata (155).JPG http://www3.telus.net/mediasorce/90M...iata (156).JPG http://www3.telus.net/mediasorce/90M...iata (157).JPG Looks like it was meant to be, all so close!! http://www3.telus.net/mediasorce/90M...iata (158).JPG Was just going to cut the mounts off of the Mustang IRS Sub-frame but then decided that somebody might want it. Will advertise for a month and then cut them off if nobody wants it. http://www3.telus.net/mediasorce/90M...iata (159).JPG |
More parts have arrived, started axle mission
Started scraping the undercoating on rear sub frame
http://www3.telus.net/mediasorce/90M...iata (160).JPG http://www3.telus.net/mediasorce/90M...iata (161).JPG Wire brushing 7.5 92 Tbird rear http://www3.telus.net/mediasorce/90M...iata (162).JPG More Parts http://www3.telus.net/mediasorce/90M...iata (163).JPG Pressing out studs so I can clean and paint. Broached hubs purchased from fellow enthusiast--- Thanks!! http://www3.telus.net/mediasorce/90M...iata (164).JPG Time to get some axles built, going to take them to the same company that builds / splines custom shafts for our GO FAST boats. Will report on progress, planning on manufacturing 10 PCS or five sets possibly to help fellow enthusiasts if the price is reasonable. http://www3.telus.net/mediasorce/90M...iata (165).JPG http://www3.telus.net/mediasorce/90M...iata (166).JPG |
Any more progress, build looks promising. I'm starting to gather my rear end stuff now since it seems to be the easiest and less expensive part of the build, I'm still not sure what to do about axles thougg so hopefully ur guys make some for us
|
Work in the way of Hobby!!!
The other job I have besides building Go Fast Boats is Movie Theater Maintenance. Guess what? you Hunger Games / Star Wars freaks have made me way too busy ATM. Changing Screens, fixing seats, testing sound / picture has me and my crew running 120%. The term "The Show MUST Go On!" takes a whole new meaning for me. LOL. I enjoy the pressure and been at it for 25 years so it will be soon over. However to add to the pile while I was out of town, my storage place was broken into, (2nd time), and about $40 000.00 in Professional Cinema Amps, speakers and processors were stolen. Glad they were stupid and took the worthless stuff and left my tools behind. As soon as they plug in the processors to the net it will handshake with head office server, can't wait. So long story shortened, my work shop is packed full of my storage tools and I am on the road for a few weeks yet. I should be back on the project 3rd week in January, I hope. Trying to be done for the season opener Instant Green Drags at the local track, (Thunder Mountain).
Keep Moving Forward Dean0 |
Sorry to hear about the recent break-in. I despise a thief and hope he/she gets caught.
Really enjoy your build thread. You have quite the skills and great attitude! May the force be with you for the next few weeks at the various theaters... That's an interesting line of work that I've never even thought about before! |
Small Update - Project not dead, LOL
Feel bad leaving my project for so long, Hollywood must have done a great job this year as it has been one of my busiest in 10 years. Been getting in the way of my project, LOL.
Few updates, more to come over the next few weeks. Pressing in F-Body studs, keep local track happy!! http://www3.telus.net/mediasorce/90M...iata (167).JPG http://www3.telus.net/mediasorce/90M...iata (168).JPG http://www3.telus.net/mediasorce/90M...iata (169).JPG Beefy looking studs in the Miata hubs, going to need some 12mm rubber stud protectors or extended nuts with covers. http://www3.telus.net/mediasorce/90M...iata (170).JPG Price was right on the wheels, using 04 16" wheels with 205/45/16 rubber. I liked the look of the Firehawk Indy 500 so I thought why not!! http://www3.telus.net/mediasorce/90M...iata (171).JPG http://www3.telus.net/mediasorce/90M...iata (172).JPG http://www3.telus.net/mediasorce/90M...iata (173).JPG Decided to use RED KYB's this build, mostly street driven http://www3.telus.net/mediasorce/90M...iata (175).JPG Fresh new NB tops from MAZDA, $25ea. http://www3.telus.net/mediasorce/90M...iata (174).JPG 90 front Spindles with 04 sport backing plates, direct fit. New spindle nuts too!! http://www3.telus.net/mediasorce/90M...iata (177).JPG http://www3.telus.net/mediasorce/90M...iata (176).JPG Rear hubs with 04 sport backing plates, pressed directly on 90 hubs http://www3.telus.net/mediasorce/90M...iata (183).JPG http://www3.telus.net/mediasorce/90M...iata (184).JPG More updates soon, Rear sub-frame mods, motor mounts and sub-frame connectors V2.0. :skid: |
Few more updates, project finally moving again
Drag Racer came out in me and I moved the engine as far back as I dare. Actually measures 3/8" clear to firewall from back of head.
http://www3.telus.net/mediasorce/90M...iata (185).JPG Clutch Master Modification, I used a 70 CJ master with a 13/16" bore. Built a 1/2" aluminum Adapter with a bit of grinding to clear the mounting bolts. I will share specs with anybody interested in building their own adapter. http://www3.telus.net/mediasorce/90M...iata (188).JPG http://www3.telus.net/mediasorce/90M...iata (187).JPG Used the stock Mazda Clutch rod and threaded the shaft with a 5/16" X 18 TPI Die, cut the eyelet off of the CJ master and also threaded the shaft the same. I then tapped a piece of 3/8" cold rolled and joined the two together. Bit of loc-tite red and we are good to go. http://www3.telus.net/mediasorce/90M...iata (186).JPG Driver side header Clearance, She be tight!! I have the engine offset 1.25" to the Passenger Side. http://www3.telus.net/mediasorce/90M...iata (189).JPG http://www3.telus.net/mediasorce/90M...iata (190).JPG Tiny bit of Ball peen love and Viola!! we have 3/8" clearance. Going to ceramic coat headers after I finish the collector down pipes so I am happy with the clearance. http://www3.telus.net/mediasorce/90M...iata (191).JPG Engine mounts mocked up, will do a bit more shaping to the raw set up to hopefully give a closer to factory appearance. Drivers side mock up http://www3.telus.net/mediasorce/90M...iata (192).JPG http://www3.telus.net/mediasorce/90M...iata (193).JPG http://www3.telus.net/mediasorce/90M...iata (194).JPG Passenger side, Pretty happy with the mock up so far, did not want to add the extra cross bar I have seen other member do to mount a SBF in a V8 roadster subframe. http://www3.telus.net/mediasorce/90M...iata (195).JPG http://www3.telus.net/mediasorce/90M...iata (196).JPG http://www3.telus.net/mediasorce/90M...iata (197).JPG Sub frame 2.0 with tranny mount next :skid: |
Another small update--- hard to find time ATM
Start of my Sub Frame Connector 2.0 install, much happier with fit verses my previous attempt with 14 ga 2" X 2" tubing. Going to build a small tool that will allow me to spread the top out a bit before I weld things up. The original Mazda floor stiffener rails are tapered wider at the top then the bottom. Possibly add a bit of body glue / seam sealer between the new and old.
http://www3.telus.net/mediasorce/90M...iata (198).JPG Open channel along top inside will allow me to gain access to the inside of the rail to mount blind nuts for trans cross member install, etc.. http://www3.telus.net/mediasorce/90M...iata (199).JPG Any hot rodder that lives in a winter climate with traditional tubing sub frame connectors knows the weather is brutal on closed frame rails. This will allow me to seal the rails against moisture before I cap off the inside. http://www3.telus.net/mediasorce/90M...iata (200).JPG Notched in for strength http://www3.telus.net/mediasorce/90M...iata (201).JPG Small amount of flange plier work and things will fit perfect for welding http://www3.telus.net/mediasorce/90M...iata (202).JPG Did I mention I HATE under coating http://www3.telus.net/mediasorce/90M...iata (203).JPG Tranny in position http://www3.telus.net/mediasorce/90M...iata (204).JPG Tad more work with the flange pliers http://www3.telus.net/mediasorce/90M...iata (205).JPG Quick break to enjoy the last of our sun here in Kelowna, BC. Entrance to local 1/8th mile track behind me. http://www3.telus.net/mediasorce/90M...iata (206).JPG Start on shifter handle, used an old shock mount for a 80 Chev Blazer for shifter base and an old RAZO shift knob. Good luck bending that, lol http://www3.telus.net/mediasorce/90M...iata (207).JPG http://www3.telus.net/mediasorce/90M...iata (208).JPG Bottom of aluminum extension may require shaping yet to clear Rubber Shifter Boot / Seal http://www3.telus.net/mediasorce/90M...iata (209).JPG More to come!!!! |
Hey. Im new to the miata scene but not to mustangs. I have a perfect donor car, 91 base 1.6 manual it has new koni suspension entire kit springs and all. Roll bar, racing harness. I have an 85 capri 5.0ho a t5 an aod and a 7.5 rear (if needed). Whats the next cheapest step to do the swap
|
Hello caprikid22
Not really the thread to answer your question, I would start a new thread and ask this question, but here are my thoughts. Cool on the existing 91 and extra goodies, this question really depends on your welding / Fab skills. You will need a front subframe; aftermarket or modded stock, oil pan; modded, headers, trans mount, frame stiffeners, driveshaft, clutch mods, new independent rear pumpkin, rear axles / hubs, front springs?, shifter handle and a ton of patience. I have built a lot of Hot Rods / vintage stangs and none have tested me like this little project has. Be prepared to spend at least 250 hrs of your time and more money then you thought. Read and ask advise, chances are somebody had been there done that and will help you towards a solution. Kudos to those that have decided to make this their first Hot Rod project, I would say this project is an easy 8 out of 10 for difficulty. The only other project I have worked on as difficult is an Art Morrison Framed model A with an Injected,( Modded Hilborn), 454 and 9" rear, 24" flange to flange, she got steamrollers out back, lol. Good Luck and don't be afraid to ask questions. PS - Back in early 90's I had an ISMA prepped 85 T-Bird I added stretched Capri flares to, was a fun car till I drove her off the end of a hairpin at speed. First lesson in being aware of when it rains and pea gravel gets washed out on the pavement. Turned wheel and nothing happened but driving straight off the end, brakes useless too. Lesson learned, lived to party another day. Party on!! Dean0 |
Another small update - Rear end mounting
Few more pics.
As you may have noticed I like to save my final welding for all at once. I am a wood worker mainly, (Journeyman), so I have to commit my money making woodwork to my shop space. I either have to wait for a sunny calm day outside or spend a few hours cleaning the shop so I don't risk burning her to the ground, lol. I am planning a weld session soon and will update results, but for now please enjoy my ideas and fit up. Start of rear end mounting brackets Using the 99 Cobra bracket with Maximum Motorsports Urethane Bushing http://www3.telus.net/mediasorce/90M...iata (210).JPG Piece of 1/8" stock bent in vice over two pieces of 2" angle iron http://www3.telus.net/mediasorce/90M...iata (211).JPG Going to add another piece of plate on the back yet to reinforce joint to sub-frame http://www3.telus.net/mediasorce/90M...iata (212).JPG Front mount pattern, taking to local metal shop I have connection with and will use their tools after hours to shape pieces. http://www3.telus.net/mediasorce/90M...iata (213).JPG New tabs for my 90 rear sub-frame, going to use BMW's Cruciform idea for bracing. http://www3.telus.net/mediasorce/90M...iata (214).JPG http://www3.telus.net/mediasorce/90M...iata (215).JPG Going to use a piece of 3/16" aluminum plate shaped like 1/4" MDF in pic below. Going to be a challenge to snake my planned single 3" exhaust, however I am sure I can make it fit http://www3.telus.net/mediasorce/90M...iata (216).JPG One of my main shop work horses, works well for when I build my mandrel bent exhaust. http://www3.telus.net/mediasorce/90M...iata (217).JPG I added the 1/4" aluminum table, easily unscrews http://www3.telus.net/mediasorce/90M...iata (218).JPG Keep moving forward Dean0 |
Bit more to add today
Finished up my rear mount, now to level and set pinion angle to finish front off!
Brace laid out for cutting with band saw http://www3.telus.net/mediasorce/90M...iata (219).JPG In vise ready to fold stiffening tabs http://www3.telus.net/mediasorce/90M...iata (220).JPG Tabs Bent http://www3.telus.net/mediasorce/90M...iata (221).JPG Test fit to find where to slightly bent to match sub-frame http://www3.telus.net/mediasorce/90M...iata (222).JPG Few Close - ups of fit http://www3.telus.net/mediasorce/90M...iata (223).JPG http://www3.telus.net/mediasorce/90M...iata (224).JPG Couple holes to lighten the load, hehe http://www3.telus.net/mediasorce/90M...iata (225).JPG http://www3.telus.net/mediasorce/90M...iata (226).JPG Bit of grinding / clean up http://www3.telus.net/mediasorce/90M...iata (227).JPG Last test before welding http://www3.telus.net/mediasorce/90M...iata (228).JPG http://www3.telus.net/mediasorce/90M...iata (229).JPG Having a good weekend Dean0 |
bit more fit up before welding starts
Finished most of the lay out for my planned cruciform under the rear. I will be adding scallops to the side as well, possibly eliminate planned holes in favour of a larger scallop to clear the planned single 3" exhaust. I know I won't be tricking anybody, lol. might choose center out and build a custom sail panel, I do work in a go-fast boat fiberglass shop after all.
http://www3.telus.net/mediasorce/90M...iata (230).JPG 3" cardboard mock up for available mandrel bends. Looks like 1 - 4"R 90 with 1.5" legs and 2- 3"R 45's will fit the bill just perfect. http://www3.telus.net/mediasorce/90M...iata (231).JPG lots of room, try fitting a pair of blown big blocks in a back of a go fast deep V-Hull boat, loads of room here. http://www3.telus.net/mediasorce/90M...iata (232).JPG Down under the axle CV stub shaft, away from the rubber, Do plan on making a custom heat shield. http://www3.telus.net/mediasorce/90M...iata (233).JPG View out back, looks like I will be turning a quick 90 here so the factory hanger will be right where I need it. COOL!! at least 1 thing won't neet to be modded.:thumbsup::thumbsup: http://www3.telus.net/mediasorce/90M...iata (234).JPG I had time to bend up some 3/16" plate for front mounts. Factory Cobra IRS mounts were only 1/8" so I deemed 1/4" way to heavy. Its always about the weight, that is why we put big engines in small cars. http://www3.telus.net/mediasorce/90M...iata (235).JPG Will do a bit of shaping tonight to remove what I can. http://www3.telus.net/mediasorce/90M...iata (236).JPG Maximum Motorsport 99-04 Cobra IRS urethane mounts. Measure different than stock 3/4" - 3/4" spacing, they are 7/8" - 5/8". I will mount with the thicker side to my new flange that way I can flip bushing and shim if I need to adjust. http://www3.telus.net/mediasorce/90M...iata (237).JPG 9ga 2" reinforcing plate, will add a few weight holes after mounts are fabbed http://www3.telus.net/mediasorce/90M...iata (238).JPG Currently sitting at 1 degree to match engine down angle. http://www3.telus.net/mediasorce/90M...iata (239).JPG will update soon with more progress |
Finished Rear Mounts time to weld
Just going to add a few more pics to the pile. I am just waiting for a chunk of 4" pipe to build my trans mount. I must not be asking the right people,lol. Seems like a hard thing for me to find. Welding shop has lots of cast pipe but no chunks of thick wall 4" steel pipe.
Front mount fit up, drivers side http://www3.telus.net/mediasorce/90M...iata (240).JPG coped to sub-frame http://www3.telus.net/mediasorce/90M...iata (241).JPG Side profile, tapered the bracket from 3" to 2 1/4" at top http://www3.telus.net/mediasorce/90M...iata (242).JPG Passenger Side http://www3.telus.net/mediasorce/90M...iata (243).JPG Bushing installed, will drill mounting hole after welding up http://www3.telus.net/mediasorce/90M...iata (245).JPG Same idea on the Drivers side http://www3.telus.net/mediasorce/90M...iata (246).JPG Front view with stiffening bracket installed. Going to trim a bit of weight yet. http://www3.telus.net/mediasorce/90M...iata (247).JPG All important measurement for the curious. http://www3.telus.net/mediasorce/90M...iata (248).JPG now the grinding and clean up begins. Very excited that I will have the major running gear work done and I can set her on wheels to roll around. Going to start working on the roll bar next. I want to go with a double hoop but I also want to add door bars. Still working on my idea, might skip the door bar for just a sill bar. Door bars are a pain in a street car but when I was 20 that was OK, now I am 50 and they suck,LOL.:sign0134: |
Front Bracket C/W Speed Holes
Just to add the last bit of Fab work on the front mount before I start welding.
http://www3.telus.net/mediasorce/90M...iata (249).JPG other side http://www3.telus.net/mediasorce/90M...iata (250).JPG Complete with speed holes, LOL http://www3.telus.net/mediasorce/90M...iata (251).JPG I am very pleased how all of this has turned out, the last decision I have to make is whether to just TIG up the hole in my rear cover or order the Maximum Motorsports Rear cover and get it over with. http://www3.telus.net/mediasorce/90M...iata (252).JPG I would then be forced to install a rear oil cooler, and prolly a good idea over the long run with the 3 inch exhaust passing so close. The cool factor alone is good for me just not sure where I would locate the heat ex-changer. |
Trying to keep moving forward
Now that the rear mounts are fabbed up I want to focus my attention on the cracked rear cover. I knew there was damage to that side when I bought the original 99 IRS rear sub-frame as both the axle CV was trashed and the trailing arm was welded, ( Roughly), I asked the owner if there was any thing else wrong and he said, " Nope All Good". Got it home and notice a bit of undercoating sprayed on the outside of the rear cover, little laquer thinner later and below is what I have to work with. Test my TIG skilz for sure. Going to drill a small hole at the end of each crack to help stop it and clean out the crack with my coping saw. Wire brush with acetone and fire up the TIG. Will be the first time to TIG Al, done it lots with a torch but that was 25 years ago. Can't wait to give er a go. :thumbsup:
Gear set covered with rag to help keep out the grime. Will check backlash before I put cover back on. http://www3.telus.net/mediasorce/90M...iata (253).JPG View of epoxy on inside http://www3.telus.net/mediasorce/90M...iata (254).JPG Close up on the inside http://www3.telus.net/mediasorce/90M...iata (255).JPG At least four cracks to chase, gotta grab some glowing ink yet and a black light see how far the cracks go. http://www3.telus.net/mediasorce/90M...iata (256).JPG Inside view http://www3.telus.net/mediasorce/90M...iata (257).JPG View from the rear of my front rear end mounts. Welding very soon http://www3.telus.net/mediasorce/90M...iata (258).JPG Still looking for a piece of 4" steel pipe for my trans cross member, I will find some eventually, hate to have to buy 20', lol. Roll bar idea is also growing, must order up some 1 3/4 round stock. Keep moving forward !! |
I replaced a lot of those differential covers back when I did all of the differential work at the Ford dealer. Since you appear to have some pretty good fabrication skills, you may want to replicate this brace from Steeda: Steeda 1999-04 Cobra Mustang IRS Differential Cover Brace 555-8118 | Free Shipping!
|
Or, if it's not too late, take a look at the mounting scheme for the late model Explorer 8.8. Pretty sure the cover will fit your diff.
Also, this outfit, as well as some others, will cut a foot of pipe and ship it to you. Too bad you're in Canada. You might choke on the shipping ASTM A513 1020 Drawn Over Mandrel (DOM) Steel Round Tube | Buy Online | Cut to Size | No Minimum Order Personally, I would go with 1/2" wall Mike |
Rear Cover Blues, LOL
tbone
Ultimately I think I would like to add a "steeda like" cover brace along with an oil cooler set up, but to be honest I think the current set up will work fine. The mx5 is so much lighter I feel quite confident the urethane bushing upgrade will do the trick. I have already taken a bit of heat in another thread for using the 99 cobra rear bracket and not the proven tried and true method. Guess I like to learn the hard way. If it is a problem then I will bite the bullet and just change the rear mount, I do have a chunk of 4" aluminum angle that I was going to originally use. I just hate the idea of the hidden nuts up in the sub frame, asking for issues in the future. That's just me. I think the cover was broken in an accident as the axle on that side and rear trailing arm were both broken as well when I purchased the IRS setup. I am only thinking 320 or so HP, but a shot of squeeze might be in order. The TIG work will be for practice mainly, I did see the local Pick n Pull had a few Tbirds / Cougars for the picking so think I will just go grab a cover, just being lazy. cvx_20 Thanks for the link, I went to a shop today after work and they had what I was looking for. I also choose to go with 1/2" as 3/8" did appear to be a bit light. As to the Explorer cover, I plan on trying that set up in round two. I have located a LS3 for a good deal so I am sure the Explorer Mounts will fit my needs better. Thanks again for the input:skid: Dean0 |
Got to some of the welding today
Few quick pics of my welding, getting close to bolting on the wheels..
Rear mount http://www3.telus.net/mediasorce/90M...iata (259).JPG Inside View http://www3.telus.net/mediasorce/90M...iata (260).JPG Front IRS Mounts http://www3.telus.net/mediasorce/90M...iata (261).JPG Center including front brace tacks http://www3.telus.net/mediasorce/90M...iata (262).JPG Other side http://www3.telus.net/mediasorce/90M...iata (263).JPG Top View http://www3.telus.net/mediasorce/90M...iata (264).JPG Like to wrap weld around 1/2" while still hot. I feel it helps with strength. Took me a bit to figure out why the extra splatter, my machine usually welds very clean, OOOPS!! forgot I was welding stainless last, good strong joints now, will switch wire for frame connector 2.0. http://www3.telus.net/mediasorce/90M...iata (265).JPG Rear View, very pleased with how things turned out http://www3.telus.net/mediasorce/90M...iata (266).JPG Front View looks good too http://www3.telus.net/mediasorce/90M...iata (267).JPG Bottom of Rear about 1/4" higher than lower control arm pick up points, perfect, exactly what I wanted. http://www3.telus.net/mediasorce/90M...iata (268).JPG Cruciform Mount http://www3.telus.net/mediasorce/90M...iata (269).JPG All four welded in place, amazing how stiff this small mod made things http://www3.telus.net/mediasorce/90M...iata (270).JPG Front engine mounts, Drivers Side http://www3.telus.net/mediasorce/90M...iata (271).JPG Passenger Side http://www3.telus.net/mediasorce/90M...iata (272).JPG Painted up ready for Test fit and exhaust fit up. http://www3.telus.net/mediasorce/90M...iata (273).JPG Time for a nice cold Brew :beer: and a soak in the Hottub:smokin: Try and get Frame rails welded in yet this week. :skid: |
Looks great!
|
Few more pics - bit more progress
Squeeze these updates in while I grill the turkey for Thanksgiving dinner.
Cut a small clearance notch to clear rear cover brace in sub frame http://www3.telus.net/mediasorce/90M...iata (274).JPG Same for front of Pumpkin, pics make it look closer than it is http://www3.telus.net/mediasorce/90M...iata (275).JPG http://www3.telus.net/mediasorce/90M...iata (276).JPG Sat out in the rain last night, under a tarp of course http://www3.telus.net/mediasorce/90M...iata (277).JPG looks $EXY in there!! http://www3.telus.net/mediasorce/90M...iata (278).JPG Engine sits 1.25" offset to passenger side, 1 degree down angle http://www3.telus.net/mediasorce/90M...iata (279).JPG I love laying on my back in the rain, hehe, much harder to install engine / trans with mounts welded in. http://www3.telus.net/mediasorce/90M...iata (280).JPG Only casualty seems to be the passenger engine mount was slightly twisted when I welded things up. I can live with it... LOL http://www3.telus.net/mediasorce/90M...iata (281).JPG Test fitting new rear 04 SPORT brakes / calipers. Good thing I did as one rear caliper had a bent pin and was frozen in place. Took slide hammer to separate caliper from mount, will order new main pin from M4ZDA, just ground old pin down till it fit for testing. http://www3.telus.net/mediasorce/90M...iata (282).JPG Rubber brake lines till I get through inspection, don.t need the extra questions http://www3.telus.net/mediasorce/90M...iata (283).JPG all new hardware for mounting suspension / hubs. Was surprisingly cheap from M4zda dealer but then they are supporting my project, well my effort to find parts, like the stock 04 SPORT backing plates. With out me having to supply a VIN!! http://www3.telus.net/mediasorce/90M...iata (284).JPG Using the mounting bolts and washers for the rear end to hold the hub races together to roll around the shop. http://www3.telus.net/mediasorce/90M...iata (285).JPG Hardest part for me now is not to rush the assembly, so much more fun to assemble, hard not to rush. Getting closer to testing those asphalt crayons :skid: Dean0 |
Really diggin the stock wheels and Sport Brakes
Few more after dinner pics
Have to admit I am liking the 11" rear disc brakes. I have blue caliper paint to apply as RED is so over done and well it was the only color the wholesaler had in stock. Rims will look stellar powder coated Matte Black. http://www3.telus.net/mediasorce/90M...iata (286).JPG 16" wheel with 205 / 45 series http://www3.telus.net/mediasorce/90M...iata (287).JPG 12mm F-Body extended studs barley stick out, now to find some 12mm silicone jackets to protect the threads http://www3.telus.net/mediasorce/90M...iata (288).JPG very happy with my progress over the long weekend, I can see the end quickly approaching. Dean0 |
small amount of painting / fit up
Finished painting the sub frame
http://www3.telus.net/mediasorce/90M...iata (289).JPG http://www3.telus.net/mediasorce/90M...iata (290).JPG Brand new Caliper Pistons and rubbers http://www3.telus.net/mediasorce/90M...iata (291).JPG Thought "Why Not?" a pint of ceramic caliper paint goes a long ways http://www3.telus.net/mediasorce/90M...iata (292).JPG Front / Rear 04 sport brackets all painted up... will go powder coat next build http://www3.telus.net/mediasorce/90M...iata (293).JPG Tricky process getting those outer seals to cooperate, made me think real hard http://www3.telus.net/mediasorce/90M...iata (294).JPG Fronts greased / assembled / ready to mount -- that small pint of paint is maybe 1/3 empty, goes a long ways but does not flow out well, leaves a few brush strokes. Very Smelly and possibly the fumes had me painting way more than needed http://www3.telus.net/mediasorce/90M...iata (295).JPG As the rears were REMAN parts I did not completely disassemble to paint http://www3.telus.net/mediasorce/90M...iata (296).JPG Local shop had a sale on "Speed Bleeders", paid $7.50 for the 2 pair, fronts mounted in calipers. http://www3.telus.net/mediasorce/90M...iata (297).JPG Going to assemble the front and rear sub-frames and mount the wheels tomorrow. I need this project rolling as the snow is coming. Then I can roll the car into my shop for warmer / dryer work. More soon Dean0 |
Wet Weekend / slow progress
Managed to install front sub-frame between wet spells and torqued mounts, except for suspension pivots, will torque once sitting on it's own shoes. Front Rotors are used, have a new set on the way so I can paint to match the rear
http://www3.telus.net/mediasorce/90M...iata (298).JPG Front Wheels mounted http://www3.telus.net/mediasorce/90M...iata (299).JPG Just a hint of Caliper peeking through http://www3.telus.net/mediasorce/90M...iata (300).JPG Not sure how folks feel about the modified M4ZDA Symbol but I think I am going to cast up four new 52mm aluminum wheel centers with the " Flying M" and this will allow powder coating vs the stock plastic center cap. I also purchased the new 2015 MX5 rear badge and my local foundry buddy is going to cast up a " .0" in similar script so it will read " MX5.0". Trying to be a tad sneaky, lol. http://www3.telus.net/mediasorce/90M...iata (301).JPG Work has me leaving town for a week or so, more when I get back and hopefully dry inside my shop. Dean0 |
Finally back on her own shoes, big day!!
Rear MX-5 Emblem from 2016, like the script wanting to add the .0
http://www3.telus.net/mediasorce/90M...iata (302).JPG Rear Sport Calipers peeking through http://www3.telus.net/mediasorce/90M...iata (303).JPG All snugged up ready to set down http://www3.telus.net/mediasorce/90M...iata (304).JPG BIG DAY... been waiting almost a full year for this moment... too bad it all has to come apart one more time for paint. http://www3.telus.net/mediasorce/90M...iata (305).JPG 4X4 mode achieved... low rider buddies already laughing at my "Dukes of Hazzard" set up. LOL http://www3.telus.net/mediasorce/90M...iata (306).JPG Looking Good to me, can still close stock hood, will have to cut bracing to clear filter. http://www3.telus.net/mediasorce/90M...iata (307).JPG Cowl bars back on to test fender interference, if any... all looks good so far http://www3.telus.net/mediasorce/90M...iata (308).JPG Found this oil cooler from an 87 F350 with 460... want to try and use, looks like it clears. http://www3.telus.net/mediasorce/90M...iata (309).JPG Problem is when I grabbed this 20 years ago from the junk yard I did not grab the block insert. Also found out F0RD does not carry that block adapter, (C9AZ-6890-A), any more, just the one on the right. http://www3.telus.net/mediasorce/90M...iata (310).JPG I want the one on the left, if anybody has this kicking around their shop and willing to throw in a bubble wrap envelope and mail it to me, I will happily pay a fair price. http://www3.telus.net/mediasorce/90M...iata (311).jpg More updates soon Dean0 |
test fit new front fenders
Starting to look more like a car now
http://www3.telus.net/mediasorce/90M...iata (312).JPG http://www3.telus.net/mediasorce/90M...iata (313).JPG Really happy with the fit of these aftermarket fenders, just dropped into place, no adjusting done yet. http://www3.telus.net/mediasorce/90M...iata (314).JPG http://www3.telus.net/mediasorce/90M...iata (315).JPG Cowl Braces clear no problems http://www3.telus.net/mediasorce/90M...iata (316).JPG going to rotate front shock 180 so adjuster is facing the rear. http://www3.telus.net/mediasorce/90M...iata (317).JPG Keep Moving Forward Dean0 |
Few Small Updates...Busy time of year for me
Decided to use a fuel pump from a 84 V3TTE, seemed the easiest as I wanted an "in tank", low pressure pump. This is a C4RTER pump, Rated at 12 - 23 psi @ 50 GPH. Should be enough pump to supply my 650CFM H0LLEY and 150 shot of laughing gas.:cheeky4: I had to build a new bottom bracket and I Silver Soldered in a new 3/8" steel supply line
http://www3.telus.net/mediasorce/90M...iata (318).JPG 3/8" brass elbow with a 3/8" barb adapter http://www3.telus.net/mediasorce/90M...iata (319).JPG Trying to find room to mount a "LINE L0C" and manual proportioning valve. http://www3.telus.net/mediasorce/90M...iata (320).JPG New to me E7TE heads to start hogging on, just waiting for my new burr kit to arrive. Happy I found a local rodder upgrading to GT40 pieces and it saved me a trip to the local DIY yard. http://www3.telus.net/mediasorce/90M...iata (321).JPG Happy, Happy Days, I found my oil cooler block adapter I needed, only cost me $15 http://www3.telus.net/mediasorce/90M...iata (322).JPG Hope to get more welding done this weekend Dean0 |
Dean0 said "New to me E7TE heads to start hogging on, just waiting for my new burr kit to arrive. Happy I found a local rodder upgrading to GT40 pieces and it saved me a trip to the local DIY yard."
I started out with E7 heads and was happy with them till I found a deal on a new set of AFR 165s ($950 ish). With the stock 89 HO roller cam and stock heads the lit'l car seemed to pull harder with the E7's. Raising the rev limiter from 5 to 6k did help the AFRs and of course I wouldn't go back. Stock ain't always bad. |
Hello 5.0MX5
I agree that stock AL heads will out flow a good set of ported stock iron heads any time. I am only using the iron heads as I want to keep it more bullet proof for the street and leave it as an option for the new owner to possibly do on their own. As I am using a stock 85 HO intake ( ported ), I wont need more flow than I can get from the E7 heads. I will be running a stock looking H0LLEY 4180 from same 85 GT, ( Choke blended off, 4150 secondary metering plate, and duel feed 4150 bowls), After a bit of blending and polish I expect to flow close to 700CFM. I will also sport 1.7 rockers and an E roller cam and chances are I will cut a 1.55 exhaust valve seat, seems to work well for the N02 gains. I know I can personally get this head to flow close to 200 CFM on the intake and 150 cfm on exhaust. I can prolly only make the intake manifold to flow 190 cfm haven't tried with a stocker. Got lots of practice with these heads on old race car, just trying to be a bit sneaky, that's all. Don't want to give out all my secrets, lets just say looks will be deceiving once finished. Wanted to add, yes stock iron heads pull good to a certain HP, remember F0RDS like port velocity and iron heads assist with this, more velocity means more nitrous down the hole. I ran a 300hp hit on my ported E7 heads while my buddies with the aftermarket AL heads were getting nitrous hick-ups at the 250 HP level. Defiantly don't under estimate the iron heads. Dean0 :skid: |
Small update---progress a bit slow till I clean shop!!
Oil cooler adapter mounted in place
http://www3.telus.net/mediasorce/90M...iata (323).JPG Alternator / air pump bracket in place http://www3.telus.net/mediasorce/90M...iata (324).JPG F0RD F150 Master, 1 1/16" bore... looking for short throw for easier heel / toe fun!! Still planning "LINE L0C" / manual rear proportioning valve locations http://www3.telus.net/mediasorce/90M...iata (325).JPG Modified, ( Dropped tensioner 5/8"), for clearance. Small pulley on alt. from 86 GT http://www3.telus.net/mediasorce/90M...iata (326).JPG Water Pump pulley from 81 GT, modified for normal rotation 83 water pump,(83 with manual steering) http://www3.telus.net/mediasorce/90M...iata (327).JPG My old 63 F4LCON fan blade, look out fingers, my trusty drilling jig http://www3.telus.net/mediasorce/90M...iata (328).JPG Aftermarket lower pulley, all of the above out of my hoarding mustang junk pile. Figured smaller main pulley will help with sway bar clearance and the down sizing of the water and alternator pulleys should keep rotational speeds required for efficient operation. http://www3.telus.net/mediasorce/90M...iata (329).JPG Fairly small pulley, may have to increase size for city traffic or switch to electric pump. http://www3.telus.net/mediasorce/90M...iata (330).JPG Updated NA 90 dash with NB white needles, oil pressure added MPH speedo. Wanted the RSM signal so I can install cruise / log speed. http://www3.telus.net/mediasorce/90M...iata (331).JPG Old dash with red needles, broken fuel needle, scratched faces and I think the old odometer may have been rolled back. http://www3.telus.net/mediasorce/90M...iata (332).JPG I had to say YES to these 82 GT front fascia and light bar. I have been looking for this front end for 20 plus years. Going to copy lower front dam and see if I can adapt to MX5 project. http://www3.telus.net/mediasorce/90M...iata (333).JPG Will be used to turn my son's 90 convertible build into a 4 eye clone, I know the 4 eye purists are shuttering...LOL. I have the parts, that's why, HeHe http://www3.telus.net/mediasorce/90M...iata (334).JPG More updates soon Dean0 |
My first Mustang was a 1985 four-eye. I've always liked the look although it has its haters. I also had a 1987 with T-tops. That was a rare one.
How did you update the 1990 oil pressure gauge? I'm not sure about Canadian spec Miatas but the US ones had a real oil pressure gauge from 1990-1994 and a glorified idiot light from 1995 on. I'm actually planning on pulling my NB gauge from my 1999 and replacing it with a 1990 gauge and sender to make it actually read something when I do the LFX swap. Looks good! -Jason |
All times are GMT -5. The time now is 06:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands