A few random Questions
#1
V8 Miata Fan
Thread Starter
Join Date: Nov 2010
Location: Saint Louis, MO
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
A few random Questions
I am almost done with my swap and was looking for a set of heads. I may boost in the future and was looking at 185 and such. Any recomendations. I was looking at AFR's and Edelbrock has a new set of E-205's that look nice. Also looking at getting into SCCA racing what section and class do most v8 miata guys race in as I know spec I would be out. Thanks
#2
V8 Miata Zealot
I have been running the Trick Flow Twisted Wedge heads for years. I have the ones with the wire lock groove for the special Fel-pro head gaskets. Also using ARP head studs. No issues at 12 psi of boost.
#3
V8 Miata Noob
Join Date: May 2011
Location: Athens, IL
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Are you running stock cubes? If so, a 185-190 would be more than enough. Anything more than that you will be leaving alot on the table unless you are going to seriously spin your motor in the RPM's. If you are looking to boost in the future, AFR 185's are good. You would most likely make more than enough power for the traction available. If you are cost concious, Patriot performance sells a good head for what it sounds like you are wanting to do.
Thread
Thread Starter
Forum
Replies
Last Post
MRM331
Site Tips & Suggestions
0
06-05-2012 10:58 AM
baseball357mike
General Motors V8 Discussion
4
08-15-2011 05:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)