l33 cts accessory drive
I am using an l33 and looking at buying new acdelco parts to complete the front drive, with power steerign but no ac.
Here's what I have so far: -alternator- 25766345 acdelco -water pump- 89018052 acdelco -pulley-12568996 acdelco -tensioner-several pns? -belt? Do I need any brackets? Anyone using a similar setup? Thanks |
ps pump- 21997867
unless anyone makes a bracket to run a miata pump? that would save me from buying new lines also |
I just pulled the bracket to run the Miata PS pump on the pax side. It makes the lines long so I wouldn't recommend it. I switched to the CTSV pump which I got off ebay brand new as a takeoff for $90. Came with the reservoir too.
The GM PS pump drops the high pressure line straight down and is only about 10-12 inches long. Flyin Miata sells a line kit with all the fittings to run the GM PS to the Miata rack via SS line and includes a PS cooler and low pressure line to the cooler. |
YES! I finally found this web page! I’ve been looking just for this article for so
|
All times are GMT -5. The time now is 05:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands