5.0 nb wiring
I just received martins kit, however the 4 banger was sold last year, does anyone know the wiring colors for the water temp switch,and tach wire? Thanx in advanced.
|
I'll see what I can pull up in my Haynes manuals
|
Originally Posted by MLKNR
(Post 9503)
I'll see what I can pull up in my Haynes manuals
|
how about Mitchell?
http://neomiata.com/garage/index.php...ams+1997-2000/ Sometimes you have to trust the location over the color but usually these were right for me. |
Thanks for the quick response, i'll try Mitchell.
|
https://onedrive.live.com/redir?resi...t=folder%2cpdf
I named both wiring diagrams "Engine Wiring 1 of 2" and "2 of 2" Hope this helps |
This will help immensely. Thank you much.
|
How are you planning on running your speedometer BTW?
-Jason |
I hope the dakota speddo sensor will suffice.
|
you can use a 1995 vss, they have both signal and wire on then.
|
Wire the two VSS wires directly to the NB Miata tach?
-Jason |
I located the two wires of the Speedo in trans tunnle, I planned to hook those two wires to the dakota sensor of the t5, does that sound feasible? I'm a little lost.
|
If it's was me. I take the mustang 1995 VSS and hook the signal wire to your yellow cluster wire. Both are ground signal. Then i change the gear of the speed sensor to be more accurate on need. If you use a 1994 or 1995 ECM you need to send a VSS signal to the ECM.
|
All times are GMT -5. The time now is 09:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands