v8 Miata Forum - Home of the v8 Miata Conversion

v8 Miata Forum - Home of the v8 Miata Conversion (https://www.v8miata.net/)
-   Other V8, V6, 4 cyl build threads including Exocet, Catfish, Westfield, Ratrod, etc (https://www.v8miata.net/other-v8-v6-4-cyl-build-threads-including-exocet-catfish-westfield-ratrod-etc-54/)
-   -   Axle Boots (https://www.v8miata.net/other-v8-v6-4-cyl-build-threads-including-exocet-catfish-westfield-ratrod-etc-54/axle-boots-2965/)

.boB Oct 1, 2016 08:13 PM

Axle Boots
 
And other updates. For your viewing pleasure and reference.

Axle Boot replacement: Axle Boots ? Racing the Exocet

Racing windshield: Windshield ? Racing the Exocet

Oil Viscosity: Engine Oil ? Viscosity ? Racing the Exocet

Dino oil vs. Synthetic: Engine Oil ? Synthetic? Dino? So Confusing. ? Racing the Exocet

Purely for reference and enjoyment. Not selling anything. Not asking for anything. :)

SupaDupaSteve Oct 1, 2016 08:23 PM

As an alternative to that expensive Audi part.. here's the aftermarket solution. Im 99% sure this is right. But at $10 it can't hurt.

https://www.fcpeuro.com/products/aud...ttro-3b0598203

.boB Oct 1, 2016 09:13 PM

I think that's the one I bought, but couldn't use. It would probably fit without the Afco shocks, though.

SupaDupaSteve Oct 2, 2016 09:48 AM

No it's the 2 ribbed one, not the multiple ribbed one like you posted. Also, I feel the ziptie in the middle of the boot will accelerate wear due to the large square part that locks the tie rubbing on the boot every revolution. But If it works for you then go for it.

.boB Oct 2, 2016 02:01 PM


Originally Posted by SupaDupaSteve (Post 21562)
No it's the 2 ribbed one, not the multiple ribbed one like you posted. Also, I feel the ziptie in the middle of the boot will accelerate wear due to the large square part that locks the tie rubbing on the boot every revolution. But If it works for you then go for it.

Cool! Always looking for better parts choices. $75 is a lot to pay. Do you happen to have a part number? When I click on that link it doesn't give the PN.

I'v been racing an IRS Cobra for about 10 years. The cable tie really does work. I was replacing boots pretty often. Once I started using less grease and the cable tie, they last for years. I think the boot just needs that extra support at high speeds, keeping it from ballooning.

Next time I go to the track, maybe I'll put a camera down there just to see what's happening.

SupaDupaSteve Oct 2, 2016 06:06 PM

Part number is 3b0598203 Or 4b0598203
Honestly not sure of the difference between the part numbers but they appear to have the same applications. -upon some research it looks like the difference may just be the stuff that comes with the boot kit (bolt, clamps, etc) in which case it looks like the 4b0598203 would be better as it comes with clamps
. Also, yes that would be very interesting to see how the axle boot reacts at high speeds. Possibly a before and after. Ziptie/no ziptie

.boB Oct 3, 2016 09:26 AM

Thanx, Steve. I updated the web page with that info. I might just have to buy one and see what comes in.


All times are GMT -5. The time now is 10:28 AM.


© 2026 MH Sub I, LLC dba Internet Brands