65mm explorer throttle body
i need to do the modification,on the throttle body,where do you get,the cable ball receiver from.
|
I weld a mustang 95 on mine..
http://i37.servimg.com/u/f37/16/17/56/73/image_10.jpg it's solve the ball problem. |
I got a pack of receivers from big A. To mount it I made up a plate from aluminum and bolted it over the original. There's a template in one of my car domain pages. Follow the link in my sig to my site and click the "builds" link.
-Jason |
2 Attachment(s)
Here's some pics for you:
https://www.v8miata.net/attachment.p...ine=1347023387 https://www.v8miata.net/attachment.p...ine=1347023387 Where it says "lock bolt" I use a small bolt and nut to secure it. The three new reciever points let me fine tune the throttle response. Also, the springs on the Explorer throttle are rather light. I always add at least one return spring to it. Hope that helps, -Jason |
All times are GMT -5. The time now is 09:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands