1994 ls2 mx5
#1
1994 ls2 mx5 - SOLD!
This beautiful monster miata is SOLD!
1994 LS2 MX5: $15,000 <-- lower price!
Most everything is in the attached PDF.
Going to the track made easy.....you get two sets of shoes and trailer...only 2 of the second set of 4 is shown placed on the trailer.
a little extra down force with a spare trunk lid and wing for the track....
1994 LS2 MX5: $15,000 <-- lower price!
Most everything is in the attached PDF.
Going to the track made easy.....you get two sets of shoes and trailer...only 2 of the second set of 4 is shown placed on the trailer.
a little extra down force with a spare trunk lid and wing for the track....
Last edited by scrowner; 08-14-2019 at 12:56 PM. Reason: SOLD!
#2
Questions?
1. Does the car have Air Conditioning? No.
2. Do you have the Dyno sheets? No. They were done some time ago when the car had about 1000 miles on it. I do have some text exchanges with the creator of the car when I purchased it.
3. Any brake changes? No. My track experience with the car indicated it did not need a brake upgrade.
4. 4, 5 or 6 point harnesses? Car is setup for a 4 point system. Package comes with two 4 point Willans and one 5 point Schroth.
5. Rich issues? I think I addressed the major one. My answers to his issues are listed below.
6. Will you trade this car for another? Nope. I am reducing the number of cars I own. I am not interested in a trade for this V8 Miata.
7. Are Catalytic Converter installed? No and I do not have ones for the car.
8. Where is the car located? Germantown, MD. 20874
9. PCM P0601 error fixed? Yep. Had to put in a new E40 PCM. Got a refurbished one from Current Performance who did the first PCM programming and programed this new one.
2. Do you have the Dyno sheets? No. They were done some time ago when the car had about 1000 miles on it. I do have some text exchanges with the creator of the car when I purchased it.
3. Any brake changes? No. My track experience with the car indicated it did not need a brake upgrade.
4. 4, 5 or 6 point harnesses? Car is setup for a 4 point system. Package comes with two 4 point Willans and one 5 point Schroth.
5. Rich issues? I think I addressed the major one. My answers to his issues are listed below.
6. Will you trade this car for another? Nope. I am reducing the number of cars I own. I am not interested in a trade for this V8 Miata.
7. Are Catalytic Converter installed? No and I do not have ones for the car.
8. Where is the car located? Germantown, MD. 20874
9. PCM P0601 error fixed? Yep. Had to put in a new E40 PCM. Got a refurbished one from Current Performance who did the first PCM programming and programed this new one.
Last edited by scrowner; 06-09-2019 at 04:13 PM.
#4
#6
This V8 Miata is sold. The package went for $20,500. It took about 3 weeks on this site. I ONLY posted on this site. Excellent site for selling a V8 Miata! Lots of traffic to my post.
The following users liked this post:
Mpowered1 (09-02-2018)
The following users liked this post:
Mpowered1 (09-02-2018)
#9
This car will be listed here soon. Rich had some issues and I accepted the car back:
1. Fans came on then turned off. I replaced relays. Testing showed no problem till one day watching my scanner I noticed temperature to drop to -40F. Seems, there was a engine temperature sensor starting to fail. I replaced and testing so far show no issues. Fans pop and cool at around 196F.
2. Hard starting when warm. I noticed this prior to replacing sensor, but only occasionally. I am chalking this up to poor temp reading setting air incorrectly. When I caught the sensor problem the car started to cough and not run smooth. I have not yet seen this repeat since replacement. Starting this car requires a 15 second wait with fuel pump running before starting. You quick start it and there may be subsequent issues.
3. Scrubbing when turning wheels. This car is LOW to the ground. I shipped to Rich with 17s and I run the car with 15s. 17s gave a bit more ground clearance for shipping. Before shipping to Rich I had it aligned with the 15s and also pushed the front Xidas to the max height. I think for a daily, you may want spacers on the top of the Xidas for the front and maybe all around. The car will come with old shocks and mounted Xidas as is. I maxed the Xidas for delivery and if I was going to use them for track fun I would bring them back down. You decide. Scrubbing is most likely the 17s needing a bit more clearance to make sharp turns.
1. Fans came on then turned off. I replaced relays. Testing showed no problem till one day watching my scanner I noticed temperature to drop to -40F. Seems, there was a engine temperature sensor starting to fail. I replaced and testing so far show no issues. Fans pop and cool at around 196F.
2. Hard starting when warm. I noticed this prior to replacing sensor, but only occasionally. I am chalking this up to poor temp reading setting air incorrectly. When I caught the sensor problem the car started to cough and not run smooth. I have not yet seen this repeat since replacement. Starting this car requires a 15 second wait with fuel pump running before starting. You quick start it and there may be subsequent issues.
3. Scrubbing when turning wheels. This car is LOW to the ground. I shipped to Rich with 17s and I run the car with 15s. 17s gave a bit more ground clearance for shipping. Before shipping to Rich I had it aligned with the 15s and also pushed the front Xidas to the max height. I think for a daily, you may want spacers on the top of the Xidas for the front and maybe all around. The car will come with old shocks and mounted Xidas as is. I maxed the Xidas for delivery and if I was going to use them for track fun I would bring them back down. You decide. Scrubbing is most likely the 17s needing a bit more clearance to make sharp turns.
#10
This car will be listed here soon. Rich had some issues and I accepted the car back:
1. Fans came on then turned off. I replaced relays. Testing showed no problem till one day watching my scanner I noticed temperature to drop to -40F. Seems, there was a engine temperature sensor starting to fail. I replaced and testing so far show no issues. Fans pop and cool at around 196F.
2. Hard starting when warm. I noticed this prior to replacing sensor, but only occasionally. I am chalking this up to poor temp reading setting air incorrectly. When I caught the sensor problem the car started to cough and not run smooth. I have not yet seen this repeat since replacement. Starting this car requires a 15 second wait with fuel pump running before starting. You quick start it and there may be subsequent issues.
3. Scrubbing when turning wheels. This car is LOW to the ground. I shipped to Rich with 17s and I run the car with 15s. 17s gave a bit more ground clearance for shipping. Before shipping to Rich I had it aligned with the 15s and also pushed the front Xidas to the max height. I think for a daily, you may want spacers on the top of the Xidas for the front and maybe all around. The car will come with old shocks and mounted Xidas as is. I maxed the Xidas for delivery and if I was going to use them for track fun I would bring them back down. You decide. Scrubbing is most likely the 17s needing a bit more clearance to make sharp turns.
1. Fans came on then turned off. I replaced relays. Testing showed no problem till one day watching my scanner I noticed temperature to drop to -40F. Seems, there was a engine temperature sensor starting to fail. I replaced and testing so far show no issues. Fans pop and cool at around 196F.
2. Hard starting when warm. I noticed this prior to replacing sensor, but only occasionally. I am chalking this up to poor temp reading setting air incorrectly. When I caught the sensor problem the car started to cough and not run smooth. I have not yet seen this repeat since replacement. Starting this car requires a 15 second wait with fuel pump running before starting. You quick start it and there may be subsequent issues.
3. Scrubbing when turning wheels. This car is LOW to the ground. I shipped to Rich with 17s and I run the car with 15s. 17s gave a bit more ground clearance for shipping. Before shipping to Rich I had it aligned with the 15s and also pushed the front Xidas to the max height. I think for a daily, you may want spacers on the top of the Xidas for the front and maybe all around. The car will come with old shocks and mounted Xidas as is. I maxed the Xidas for delivery and if I was going to use them for track fun I would bring them back down. You decide. Scrubbing is most likely the 17s needing a bit more clearance to make sharp turns.
#11
V8 Miata Fanatic
That is very nice of you to take the car back. While no one wants to have issues with something they just bought, these cars are obviously highly modified and with that sometimes you end up with a few bugs.
#12
I truly thought the buyer was going to be excited and love it. It is a sweet car. I had NO clue he would have random over heating issues. I tried to debug the problem over phone and email and text. But no luck. It was such a shock to me that I felt so bad that the car was having this sudden issue, and I wanted him to be happy, that I paid for shipping it back to me and returned all the money. I guess it was a moment of weakness but I feel better.
#16
V8 Miata Noob
Join Date: May 2019
Location: Pennsylvania
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
#17
How much overheating happened? My knowledge is it was minimal and caught and shut off. He indicated it happened in a garage while attended.
Do aftermarket seats move? Yes, they are on sliders.
Does the horn on the aftermarket wheel function? Yes.
Do aftermarket seats move? Yes, they are on sliders.
Does the horn on the aftermarket wheel function? Yes.
#20
Yep. Car is available. I will not go through the Dyno effort and expense. Currently, I am replacing the PCM for the LS2. I was about to sell the car and in preparing for the sale my PCM for the LS2 threw a P0601. This is the PCM checksum error for its engine running code. The day before selling the car, I got this error. Anyway, I am in the process of replacing the PCM, should be finished maybe next week.
#21
6/09/2019 - this car is still available. PCM was replaced. Replaced with a refurbished E40, used same programming and same programmer - who was/is Current Performance down in FL. Ran car this weekend on the road with no issues. Car remained cool under highway speeds, hovered around 190F.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)