nafario

I just received martins kit, however the 4 banger was sold last year, does anyone know the wiring colors for the water temp switch,and tach wire? Thanx in advanced.

MLKNR

I'll see what I can pull up in my Haynes manuals

nafario

My haynes wiring colors don't match my wiring colors, "rats"!

charchri4

how about Mitchell?

http://neomiata.com/garage/index.php...ams+1997-2000/

Sometimes you have to trust the location over the color but usually these were right for me.

nafario

Thanks for the quick response, i'll try Mitchell.

MLKNR

https://onedrive.live.com/redir?resi...t=folder%2cpdf

I named both wiring diagrams "Engine Wiring 1 of 2" and "2 of 2" Hope this helps

nafario

This will help immensely. Thank you much.

MRM331

How are you planning on running your speedometer BTW?

-Jason

nafario

I hope the dakota speddo sensor will suffice.

sebz

you can use a 1995 vss, they have both signal and wire on then.

MRM331

Wire the two VSS wires directly to the NB Miata tach?

-Jason

nafario

I located the two wires of the Speedo in trans tunnle, I planned to hook those two wires to the dakota sensor of the t5, does that sound feasible? I'm a little lost.

sebz

If it's was me. I take the mustang 1995 VSS and hook the signal wire to your yellow cluster wire. Both are ground signal. Then i change the gear of the speed sensor to be more accurate on need. If you use a 1994 or 1995 ECM you need to send a VSS signal to the ECM.